Tag: Energy transfer

  • Positive, zero and negative work: how energy changes

    Positive, zero and negative work: how energy changes

    Positive, zero and negative work describe three different ways a force acts on movement. A skateboard, a wardrobe and friction show when energy increases, remains unchanged or transfers into other forms.

    Positive, zero and negative work: how energy changes

    Some changes are delivered by the world in an obvious way: an object starts, accelerates, turns, stops. But often what transforms reality begins before the visible effect. A force is more than something that pushes or pulls.
    It is what, acting through a displacement, leaves a concrete trace in the world. Physics calls this trace work. Not in the sense of effort, but in the precise sense of an action that transfers energy.
    From this point onwards, movement becomes more than what appears and begins to show you what makes it possible.

    I am Physics.

    You often see movement, but do not always see what makes it possible with the same clarity. You look at a skateboard gaining speed, a swing rising again, a wardrobe finally shifting, and think the whole change lies there, in the final gesture, in the motion that appears. But I do not live only in the visible effect. I also live in the relationship between force and displacement, at the point where an action truly changes a body’s state.

    This is what I call work.

    In my language, work is done when a body moves and the force acting on it has a component along its displacement.
    In the simplest case, when the force is constant and acts in the same direction as the displacement, you express it like this:

    W = F · s
    where W is work, F is force and s is displacement.

    This formula seems essential, yet it says something very precise:
    the existence of a force is not enough, nor is effort enough.
    For us to speak of work in the physical sense in my language, something decisive must happen: that force must leave a trace in the body’s displacement.

    Here my language separates from everyday language.

    In your daily life, work means commitment, toil, effort. In my language, however, work does not coincide with the effort you feel. This does not mean your experience does not exist: it simply means I am observing what happens from another, more precise point of view.

    If you try to move a heavy wardrobe and it does not move a single millimetre, you feel the full weight of the gesture, but the mechanical work on the wardrobe is zero. The force is there, and so is the effort, but the wardrobe does not move.

    And this is precisely the point: without displacement, no work is done in my language.

    If that same wardrobe finally gives way and begins to move, the situation changes. The force you exert, acting in the direction of displacement, does work.

    In that passage, your gesture becomes more than perceived effort: in my language, it becomes a transfer of energy.

    This means work must be measured by what a force truly does to a body, rather than by what you feel.

    To enter my language more deeply, watch a boy on a skateboard: when he puts one foot on the ground and pushes off, the board starts moving and accelerates. In that gesture, his foot pushes against the ground, and the ground responds. His body passes the push on to the board, and chemical energy in his muscles contributes to the movement.

    The skateboard does not move by itself: that push transfers energy to it, and this energy becomes movement.

    But work does not always appear in the same way. Sometimes it favours movement, sometimes it does not change it, sometimes it opposes it.

    When a force acts in the same direction as displacement, work is positive:
    the force transfers energy to the body. Its effect on the body’s motion also depends on the other forces.

    This is the case of the push that sets the skateboard moving or the push that makes the swing rise again.
    In these cases, the force does more than accompany the body:
    it delivers energy to it.

    When displacement is zero or perpendicular to the force, that force does zero work.

    This is the case of the wardrobe that remains still despite the effort of your body pushing it.

    In your language, this may appear as toil, resistance, insufficient effort; but in mine, the mechanical work on the wardrobe is zero, because without displacement no work is done.

    Then there is the case in which the force opposes motion. Here work is negative.

    Rolling resistance and air resistance oppose the skateboard’s motion. The work they do contributes to reducing the kinetic energy of the moving system.

    The skateboard gradually slows until it stops, unless you push it again.
    But this passage reveals something deeper than what appears.

    That energy which seems to vanish does not fall into nothingness: it transfers into other forms, such as heat, vibration and sound.
    Here work reveals one of its most important faces:
    it is not only a measure of change, but a measure of energy transfer.

    And so, in my language, I can tell you that:

    when the total work done on a body is positive, its kinetic energy increases.
    When it is negative, it decreases
    .
    This relationship can be written directly:

    Wtot = ΔK

    where Wtot indicates total work, Δ means “change” and K represents kinetic energy. The formula therefore says that the total work done on a body equals the change in its kinetic energy.

    This relationship is fundamental, because it unites force, displacement and energy in one clear passage. It tells you that if kinetic energy changes, the total work done by the forces is nonzero. Work describes a transfer of energy, even when this transfer is not immediately visible to you.

    At this point, if a body’s speed increases, as with the swing, the total work on it is positive.
    If it slows down, as in the skateboard, it is negative.
    If its motion does not change, as with the wardrobe you cannot move, total work is zero.

    Here this passage connects with what we have already explored.

    First you saw the forms of energy: kinetic and potential.
    Then you saw how, under ideal conditions, mechanical energy is conserved by transforming from one form into another.
    Now you can see something more concrete still: that change does not happen in a void.
    A force truly enters the scene and makes the transformation possible, transferring energy to a body or a system.
    And there change ceases to be an isolated fact and allows itself to be read as relationship.

    In your everyday life, this passage almost never occurs in the pure form of an ideal model. Forces do more than impart motion or lift objects: they often brake, dissipate and disperse.

    Friction is one of the clearest forces to observe. When a body slides across a surface, friction opposes the sliding and can do negative work on the body.
    If the total work is negative, the body slows down. Its energy is transferred or transformed.

    This is why the work of forces is an essential passage.
    It prevents you from thinking of change as something abstract or spontaneous, and shows you that behind every variation in motion there is a precise relationship between force, displacement and energy.

    I am Physics.

    When I speak of work, I am not speaking of toil, merit or sacrifice.
    I am speaking of the exact point at which a force leaves a trace in the body, in displacement, in the world.
    I am showing you that change, even before appearing, begins in the transfer of energy that makes it possible.

    If you learn to read me in the gestures you make every day, even what seems simple or too complex changes its face.
    That accelerating skateboard, that shifting wardrobe, that swing rising again become more than everyday events or actions: they become places where you can see energy passing, force making its mark, change taking shape.

    And then the world ceases to seem made only of effects and begins to show you what runs through them.
    A slowing skateboard, a rising swing, a wardrobe giving way: in each of these gestures, a force has already written something before you even saw it.
    Because every time a force does work, something in reality does more than happen: it is written.

    The Language of Physics (in Italian)

    negative work - A person pushes a wardrobe while a child moves on a skateboard.

    Read this article in Italian

  • Work in physics: when a force transfers energy through movement

    Work in physics: when a force transfers energy through movement

    Work in physics describes how a force acting along a displacement can transfer energy to a body. The change in the body’s kinetic energy depends on the total work done by the forces acting on it.

    Work in physics: when a force transfers energy through movement

    Some gestures seem simple only because they happen before your eyes. Pushing a door. Lifting a weight. Pulling a body. Walking against the wind. Letting something fall, rise, resist, change position. At first glance they seem like common actions, ordinary movements within matter. Yet behind each of these gestures there is more than something moving: there is a force acting, a space being crossed, energy that can pass from one body to another.

    I am Physics.

    Today I bring you into a word you know well, but whose meaning changes profoundly in my language: work.

    You use it every day. You connect it to toil, commitment, time devoted to something, the effort that passes through your body and mind. You say you have worked hard when you are tired, when you have used up energy, when a climb has taken your breath and strength, when a responsibility has stayed with you like a weight.

    I do not deny any of this. I know effort exists, the body consumes, muscles tremble, breathing changes, exertion leaves a trace. But when I enter matter, observe the movement of bodies and measure what happens between a force and a displacement, the word work takes on a precise meaning.

    For me, work begins at a precise point: when a force meets a displacement. Not with effort. Not with the presence of a force alone.

    A force can press, pull, hold, support. It can be intense, constant, evident. But until it accompanies a displacement, until it transfers energy along a real direction, it is not yet doing mechanical work.

    Work arises when what acts moves beyond potential, crosses a space and becomes concrete transformation.
    A door opening under the push of your hand.
    A wind-filled sail carrying a boat along its course.
    A hiker climbing a path against gravity.
    A stone sliding down a slope and transforming its height into speed.

    In each of these scenes, I am looking at more than movement: I am looking at a passage of energy.

    To understand better when a force truly does work, I must first help you clear up a misunderstanding:

    not everything that tires you does work on a body in my language.
    Imagine holding a heavy bag in your hand. Your arm is contracted, your shoulder stiffens, your breathing changes. After a few minutes, you feel the effort.
    For you there is exertion, and it is real.
    Your body is consuming energy: using it internally to maintain muscular contraction, produce tension, generate heat and preserve stability. But that energy is not being transferred to the bag as mechanical work, because the bag does not move.

    Yet the force is there. So is the effort. But there is no displacement of the bag in the direction of the force.

    Through this everyday action, I immediately show you the difference between what you feel in your body and what I measure within movement. I am not saying it is effortless. I am saying something more precise:

    effort does not always coincide with mechanical work.
    Now imagine lifting that same bag from the ground onto a table instead.
    In this case, your force accompanies an upward displacement, transferring energy to the bag.
    The bag changes position and gains gravitational potential energy: energy associated with its height.

    Here there is work. Because the force you applied produced a displacement and transferred energy, rather than because you became tired.

    In my language, however, work measures how much a force truly manages to transform a body’s energetic state, rather than how hard you tried.
    When I speak of work, knowing that a force exists is not enough.
    I also want to know the direction in which it acts relative to displacement.

    Because direction changes everything.

    Take a door, for example. You are opening it, and it opens in the direction in which your push accompanies it.
    Your force accompanies its movement.
    In that case you are doing positive work: you are transferring energy to the door and setting it in motion.

    If instead you are descending a steep path and your muscles hold your body back to keep it from falling too quickly, part of your action opposes the downward movement.
    In that case you are doing negative work: not because anything is wrong, but because you are taking energy away from movement.
    You are containing it, slowing it, modulating it.

    Now return to the door.
    If the force you apply is perpendicular to the displacement of the point where it acts, that force does zero work.
    In that case, with respect to that movement, the force is doing no work.

    So when I show you the formula for work, I am showing you more than a simple multiplication: I am showing a relationship between force, displacement and direction.

    In the simplest case, when a force is constant, I write:

    W = F · s · cos θ

    where W is work, F is the applied force, s is displacement and θ, pronounced theta, is the angle between the direction of force and that of displacement.
    In my technical language, this means that work is the scalar product of force and displacement.

    But even before the technical definition, what matters is what my formula tells you:
    not all the force that exists produces transformation. Only the part of the force acting in the direction useful to movement counts.

    So I show you that:
    if the force you apply and the resulting displacement point the same way, the angle is zero and, for the same force and displacement, work is at its maximum.
    If the force you apply completely opposes displacement, work is negative.
    If the force you apply is perpendicular to displacement, work is zero.

    It is a simple formula, but a subtle truth dwells within it:

    for energy to be transferred, a force must find a direction in which it can truly act on movement.

    Now imagine driving a sledge pulled forwards by twenty huskies across a level stretch of snow. The force with which the huskies pull the sledge through the harness does work on it because it accompanies its forward displacement. The sledge’s weight, however, acts downwards rather than pushing forwards. It is an ever-present force, but because it is perpendicular to horizontal displacement, its work in this case is zero.

    This is why I look not only at how many forces are involved, but at which are truly transferring energy, because work is the bridge through which energy passes. And the most precise way I can show you this is a relationship linking total work directly to the change in the sledge’s kinetic energy.

    In our earlier exploration of conservation of energy, I told you that kinetic energy is the energy of movement, while potential energy is the energy held in position. Now, however, I can show you how the work done by a force intervenes between these two forms.

    You can see that when the total work done by the forces on a body is positive, kinetic energy grows.
    You can see that when total work is negative, kinetic energy decreases.
    You can see that when total work is zero, kinetic energy does not change.

    I express this relationship through the work–energy theorem:

    W total = ΔK

    that is: the total work done on a body equals the change in its kinetic energy.

    With this formula, I show you more than a body accelerating or slowing down. I show you that the change in movement corresponds to a transfer of energy.
    If total work is positive, a body gains kinetic energy.
    If total work is negative, a body loses kinetic energy.
    If total work is zero, its kinetic energy does not change.

    If you pay attention, you notice that my language is very precise: it shows you that the change in kinetic energy depends on the total work done by the forces acting on that body.
    Something has transferred energy.
    Something has accompanied it.
    Something has braked, restrained or modified it.

    Now get on a bicycle with me. You are pedalling along a dirt track, then stop pushing the pedals and begin going downhill.

    At first, you feel the wheels turning, the handlebars beneath your hands vibrating slightly. Your body leans a little forwards, air passes across your face and along your body. The road seems to have become yours. But come with me now: I will accompany you in seeing what is truly happening within that movement.

    Gravity is doing positive work and accompanying the transformation of gravitational potential energy into kinetic energy. If the total work done by the forces is positive, speed increases as height decreases. Part of the energy associated with position becomes kinetic energy.

    Then you begin to brake, and as you slowly squeeze the levers, the bicycle’s brakes do negative work: they oppose motion and dissipate part of the mechanical energy, transforming it chiefly into heat at the points of contact.

    But it does not end there. Around you, air too is doing work against movement, and the greater your speed, the more air resistance makes itself felt. You do not see it as you see a stone, but your body meets it, feels it, passes through it, and your arms continually correct your direction.

    The descent you are undertaking is no longer just any descent, but a simultaneous web of contributions of work.

    Gravity accompanies.
    The brakes restrain.
    Air resists.
    The wheels transmit contact with the road.
    Your body seeks balance, yet every instant tells of a passage of energy.

    And within that passage, I measure what changes.

    Because every time a force does work, I measure more than a variation in movement: I measure energy passing from one form to another.
    And through work, I can now help you see more clearly how energy changes form between position and movement.

    Now you are lifting a stone. At this very moment, perhaps without realising it, you are doing work against gravity.

    You are doing more than “taking the stone higher than the place where you picked it up”: you are transferring energy to it and increasing the gravitational potential energy of the stone–Earth system.

    But then something happens: it slips from your hand and returns to the ground. In that fall, the reverse passage opens.

    Gravity does work on the stone as it falls. If you neglect air resistance, the gravitational potential energy of the stone–Earth system decreases while the stone’s kinetic energy increases.

    At this very moment I show you that kinetic and potential energy can transform into each other without loss of mechanical energy in ideal systems. When dissipative forces act, some of that energy also changes into other forms.

    But take care. This passage does not happen by itself: it occurs because a force is doing work, because there is a displacement, a direction, a real transfer of energy.

    Through this, I do more than tell you energy is conserved: I show you how a force, by doing work on a body, transfers energy and changes its movement or position.

    And precisely because work is a transfer of energy, work and energy are measured in the same unit: the joule.
    One joule (J) corresponds to the work done by a force of one newton when it displaces a body by one metre along the line of the force and in the same sense.

    I express this relationship as:

    1 J = 1 N · m

    With this equivalence, I want to show you that work is a precise measure rather than an abstract idea: it brings force and displacement together and says how much energy is transferred when a force accompanies movement.

    But in your everyday life a single force rarely acts alone, even on the stone falling from your hand.

    If you look more closely, even that simple gesture is never inhabited by just one action. When a body moves, several forces act together, as you saw while cycling downhill.

    The events differ, but the principle remains the same:

    some forces accompany movement, others oppose it, and others are present but do no work along that direction.

    The same happens when you climb a mountain path.

    On the ascent, you are doing more than putting one foot after the other: you are crossing a network of forces. Your breathing changes. The backpack weighs on your shoulders. Your feet seek secure support among stones, roots, soil and passages.

    But while you do all this, I see what is coming together beneath the gesture.

    Your muscles transform internal energy into work and movement.
    Gravity opposes the ascent and does negative work.
    Resistive forces take energy away.
    Through friction, the ground exerts a force on your foot and helps support and propel your body.

    Every step you take is a small negotiation between force, weight, balance, friction, breath and direction.

    The movement that appears to you as the simple, natural action of walking is actually a composite movement.
    This is why I speak of total work.

    Total work is the sum of the work done by all the forces acting on a body:

    W total = W₁ + W₂ + W₃ + … = ΔK

    that is: total work equals the change in kinetic energy.

    And it is this overall work, rather than a single force considered alone, that determines the change in kinetic energy.

    If total work is positive, kinetic energy increases. If it is negative, kinetic energy decreases.
    If the contributions balance, the final kinetic energy equals the initial kinetic energy.

    And this can happen even while you are making a great effort: you can climb at a steady pace without increasing your kinetic energy, while still transforming internal energy into height, heat, stability, resistance and forward progress.

    I read this intertwining through work, because work tells me which part of the relationship is truly transferring energy.

    I am Physics.

    I am showing you something more precise than the idea that every force is enough to change the world.

    I am showing you that a force transforms only when it finds a direction, when it meets a displacement to pass through, when it becomes a concrete relationship with what moves or begins to move.

    In my language, work arises only when that force manages to transfer energy through a real change.
    This is why work is more than intensity, more than the mere presence of force, and is not expressed power either.
    Because power will show something else: how much energy is transferred over time. But before rhythm, before the rate of transfer, I must recognise the passage.

    And work is that passage.
    It is force entering movement. It is energy changing form.
    It is the point at which an action does not remain enclosed within itself, but modifies a body’s state, its velocity, its position, its possibility.


    Every real movement carries this fabric within it.

    No gesture remains merely a gesture.
    No fall is only a fall.
    No ascent is simply an ascent.


    Behind all this, I show you what exists: energy received, energy given, energy transformed, energy retained, energy dispersed.
    Here work becomes a threshold. Because when a force meets the right direction, passes through a displacement and changes movement, something truly happens.


    Energy passes. Matter responds. And change becomes measurable.

    The Language of Physics (in Italian)

    Force - A person opens a door, a cyclist moves and a stone falls in a square.

    Force crosses space, energy changes form, movement becomes visible.

    Read this article in Italian

  • Power in physics. When work meets time

    Power in physics. When work meets time

    Power in physics describes how quickly work is done. Two actions may require the same amount of work, yet the experience can change profoundly when they happen over different lengths of time. This law shows the connection between work, time, energy and the body, revealing why climbing stairs slowly or at a run does not produce the same perception of movement.

    Power in physics. When work meets time

    Some gestures seem identical only from a distance.
    A body rises. A weight is lifted. A distance is crossed.
    From outside, movement looks the same, but something changes within: the way that work passes through time.
    Because what is done is not the only thing that matters.
    How long it takes matters too.

    I am Physics.

    So far I have told you how the total work done by the forces on a body is related to the change in its kinetic energy.
    Now, however, I want to accompany you onto a new threshold: the one where work meets time.

    An action changes not only through what it accomplishes. It also changes through the rhythm in which it happens.

    A working day has passed. You are finally at your front door, but before entering you must face several flights of stairs.
    It is an automatic action, one you perform without thinking or asking too many whys.
    Yet in this ordinary action, something important is happening.

    As you climb, step after step, your body is doing work.

    With every step, one leg rises after the other, and the sole of your foot finds the next stair.
    Your body follows the movement, carrying its weight a little higher.

    You do not realise it, but even in such a simple action, gravity opposes your upward movement.

    Your muscles respond. Your breath accompanies. Movement continues almost without needing to be thought about.

    It is automatic, almost invisible work. But this time I want to show you more than the work you are doing: I want to show how you pass through it over time.

    Observe.

    You are climbing calmly, one step after another. Your body finds its rhythm. Your breathing stays regular. You pass through the effort without concentrating it into a few instants. Movement stretches out, and work is distributed over time.

    Now observe what happens when the rhythm changes.

    It is another day.
    You are coming home more tense, your head still full of what you ought to leave outside the door.
    As soon as you reach the stairs, you do not slow down: you run up.
    But the stairs have not changed. The steps are the same as ever, and the body to be lifted is still yours.

    Yet the experience you live through as you climb is entirely different.

    Running upwards, you ask your legs to push and lift you more quickly.
    Your body has no time to spread out the movement. It has to do the work needed to lift you more quickly.
    Your breathing becomes short and laboured.
    Your heartbeat accelerates, while your muscles, responding to your request, demand more oxygen and sustain faster, more intense contractions.

    The climb has not changed: the time in which you complete it has changed.

    Now that you have lived the difference between these experiences, I want to invite you to observe them from within and arrive at the right question.
    No longer only: how much work are you doing?

    But: how long are you taking to do that work?

    Now you can see where the difference lies.
    In the first, you climb calmly, one step after another, distributing the work you do over time.
    In the second, you have changed rhythm. For the same mass and height gain, the increase in gravitational potential energy is the same, and you achieve it in less time. The total work your muscles do can vary with your movement and the resistive forces.

    And in my language, this concentration of work in time is called power.

    Now, though, I want to pause to tell you what I represent, so you can recognise me in the experience you are living as well as in the formula.

    Power does more than measure work. It measures the rate at which you do work and tells you how quickly energy is transferred, transformed, used.

    In my language, this relationship is expressed as:

    Pavg = W/Δt

    average power equals the work done divided by the time interval in which that work is done.
    If the same work is spread over a longer time, the average power required is lower.
    If the same work is done in a shorter time, the average power required is higher.

    It is also useful to recall how these quantities are measured.

    Work is measured in joules.
    Time in seconds.
    Power in watts.

    1 W = 1 J/s

    one watt corresponds to one joule per second. This means that average power tells you how many joules of work are done per second on average.

    But do not let the simplicity of the formula deceive you.

    Within that relationship between work and time lives an enormous difference in how you perform an action and experience movement.

    Through this experience, you can finally recognise in your body what I express through power: for the same amount of work, a longer time interval means lower average power. A shorter interval means higher average power.

    In this relationship, the time interval is not a fixed quantity, but the variable that can extend or compress the action through which you do work.

    Your body feels the difference. It lives it. It experiences it, and sometimes endures it.

    Now, though, since it is a beautiful day, let us go for a bicycle ride, because I want to invite you to observe even more closely how work changes its face when it meets time.

    At first you are pedalling along a level stretch. You maintain a gentle rhythm, your speed is constant and the wheels roll. You are in no hurry.
    Everything proceeds regularly and accompanies movement.

    As you move forwards, there is something worth observing.
    I have already shown you that total work can change a body’s movement by modifying its kinetic energy.

    Here, however, on level ground at constant speed, something different happens: speed does not change, and kinetic energy remains unchanged with it.
    Yet with every pedal stroke you continue to do work.
    So where does it go?

    In my language, movement never changes by itself: it always carries the trace of the forces acting through it.

    Even now, while it seems to flow unchanged, all those forces are present. And you are encountering them.

    As you pedal, your legs transfer energy to the bicycle. The air you pass through offers resistance. The bicycle’s mechanical parts dissipate some energy.
    The ground supports you and allows the bicycle to advance. On the level stretch, gravity pulls downwards but does not directly slow your forward motion.

    In this case, the work you supply serves chiefly to compensate for resistances and maintain constant movement.

    Then, suddenly, the path changes and you encounter a climb.

    The road tilts, and gravity becomes more evident. You are doing more than moving the bicycle along the path: you are trying to gain the ascent.

    Your legs press on the pedals, the wheels advance up the slope, your body accompanies the rhythm. On the most demanding stretches, you may even rise from the saddle, using your body weight to push more intensely.
    The action changes register. Your breath shortens, your muscles work harder, your body seeks balance, rhythm and force.

    You can tackle the ascent slowly, one pedal stroke at a time, letting your body find a sustainable rhythm. Or you can push more vigorously, trying to reach the top in as little time as possible.

    The route is the same. The height gained is the same, and so are your body and bicycle. For the same mass and height gain, the increase in potential energy is the same. If you arrive sooner, the average power associated with that climb is higher. The total work can vary, for example with air resistance.

    Look at what has happened.
    First you were climbing the stairs at home; now you are cycling uphill. Two different actions have brought you to the same point in the law.

    This is what I wanted to show you.
    Power does not belong to a single action. The body, the path and the way you move change, but whenever the same work is done in a shorter time, average power increases.

    And it is already there: in the rhythm with which work passes through time, rather than in the action itself.

    In my language, I show you precisely this: time is no detail external to movement. When it enters work, it changes the face of action.

    Power is the voice of time within work.

    It is what distinguishes the same action performed slowly from one concentrated into a few instants. This holds in your body, in machines and in every phenomenon in which energy is transferred.

    This is why calling something “strong” is not enough.

    I show you precisely this: force and power are not the same thing.

    Force can act on a body, but power concerns the rate at which work is done.

    Observe: you can exert an intense force without doing work if the body does not move. In that case, the mechanical power associated with that force is zero, even though your body consumes energy. If the same work is done over a longer time, average power is lower.
    When, conversely, you do much work in little time, power increases.

    Precision here does not defuse the phenomenon. It makes it truer.

    Force tells of action.
    Work tells of action along a displacement.
    Power tells how quickly that work happens.

    When you begin to recognise it, you encounter it everywhere:
    in the breath that changes as you climb stairs;
    in the rhythm that increases as you tackle a climb;
    in the arm lifting a weight slowly or with more vigour;
    in the wheels that must carry you to the top in less time;
    in the body that feels when time compresses work.
    Power makes the hidden rhythm of energy visible, but it does not replace work. It does not contradict it. It reads it through time.

    So far you have encountered work as it changes movement. Now you have observed that time too can change how that work happens, concentrating it, spreading it out and changing the intensity with which your body passes through it.

    Here power leaves its trace.

    But work has not yet revealed everything. Because how much work is done and how long it takes are not the only things that matter. What happens to that work when it passes through forces matters too.

    Some seem to return what they have taken.
    Others, such as friction, can convert some of the mechanical energy into internal energy, for example through heating.

    And so work is no longer observed only through time.

    From this threshold you will enter with me into the work of conservative and non-conservative forces. There you will see that a force matters not only for what it makes happen, but also for what it leaves after its passage.

    The Language of Physics (in Italian)

    time - A person runs up a flight of stairs.

    Read this article in Italian